Stainless Steel Countersunk Screws

ss countersunk screws manufacturer in India, buy Stainless Steel Countersunk Machine Screws and Wood Screws at factory price

Stainless Steel Countersunk Screws
Stainless Steel Countersunk Screws
 SS Countersunk Machine Screws
SS Countersunk Machine Screws
Stainless Steel Countersunk Wood Screws
Stainless Steel Countersunk Wood Screws

 

check CSK screw dimensions, supplies a full range of M4 Stainless Steel Countersunk Coach Screws

A countersunk or as regularly shortened as CSK Screw is a fastener that is sunk into a piece of lumber.  The heads of the Stainless Steel Countersunk Screws will sit below the surface of the material.

Following which, a wood plug or filler could easily fill or level up the depression created by these Stainless Steel Countersunk Machine Screws. Most ss countersunk screws manufacturer in India recommend using either bolts or large hex-head screws as countersunk fasteners. However, each of them would require a special countersink bit to achieve the optimum results. M4 Stainless Steel Countersunk Screws are one of the many techniques that could be used to join one piece of material to another.

  Since these fasteners make a very strong, yet tight joint, Stainless Steel Countersunk Wood Screws are used in those areas where fasteners or joining techniques used are not considered to be practical. For instance, if you don’t want to have to fill a too many pocket holes, Self Tapping Countersunk Screws can be used instead. The hole of a Countersunk Coach Screws is much smaller and easier to fill. Stainless Steel Countersunk Concrete Screws also can be very useful in instances where one has to deal with burred holes. Although this is entirely dependent on the severity of the hole that has been burred. The 6mm Stainless Steel Countersunk Screws can readily act as a prepared seat for the head of the fastener.

 

Price List of Stainless Steel Countersunk Screws

Description
Qty
Price
M4 x 6mm
100 piece
£5.62 ex. vat
£6.74 inc. vat
M4 x 8mm
100 piece
£5.22 ex. vat
£6.26 inc. vat
M4 x 10mm
100 piece
£4.23 ex. vat
£5.08 inc. vat
M4 x 12mm
100 piece
£5.14 ex. vat
£6.17 inc. vat
M4 x 16mm
100 piece
£5.79 ex. vat
£6.95 inc. vat
M4 x 20mm
100 piece
£6.93 ex. vat
£8.32 inc. vat
M4 x 25mm
100 piece
£7.94 ex. vat
£9.53 inc. vat
M4 x 30mm
100 piece
£8.83 ex. vat
£10.60 inc. vat
M4 x 35mm
100 piece
£13.19 ex. vat
£15.83 inc. vat
M4 x 40mm
100 piece
£11.75 ex. vat
£14.10 inc. vat
M4 x 50mm
100 piece
£12.31 ex. vat
£14.77 inc. vat

 

Offer a wide variety of CSK screw including Self Tapping And Self Drilling Countersunk Screws

 

standard size and specification of SS Countersunk Screws

Grade 18-8 Stainless Steel, 4.8, 8.8, A2, A4, A2-70; A4-70; A4-80 Countersunk Screws
Stainless Steel Screw standard ISO 14583
Stainless Steel counter sunk screws standard ISO 10642
British standards BS 57
Stainless Steel Countersunk Screws Size
  • Cold Froging : M2-M24
  • Hot forging M24-M100, 1-1/2” Dia, up to 1100mm lg
  • Machining and CNC for Customized connecting element: up to M100 / 4” Dia, up to 1500mm lg

Stainless Steel Countersunk Screws M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes

 

Length 3 mm to 200 mm
Stainless Steel Threads: METRIC, BSW, BSF, UNC, UNF or as required
Standard:
  • ISO 14585C ~DIN 7981C
  • DIN 7973C ~ISO 1483
  • DIN 7983C ~ISO 7051
  • ISO 4762, ISO 2009, ISO 7050, ISO 14587, ISO 14587, ISO 14584, ISO 14582
  • ANSI B18.3.1M
  • ASME B18.6.3
  • GB/T5782, GB/T5783, GB5783

DIN, ISO, JIS, GB, IS, BS, ASTM and all International Standards
ANSI – American National Standards Institute

DIN Standard B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985
UTS – Unified Thread Standard UNC, UNF, UNEF, UNS, NPT, NPTF
Dimensions ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded.
Tolerance +/-0.01mm to +/-0.05mm
Head drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Type Pan/ Round/ Oval/ countersunk/ Truss head
Head Pan head, flat head, oval head, hex head, phillips head
Finishing: Zinc (yellow, white, blue, black), black oxide
Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated
Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET
Finish Per ASTM A380/A380M
Production process Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing
Origin and service-region: European
Origin of Stainless Steel Countersunk Screws are Western European. However projects with eastern origin are possible on request.
Surface Coating:
  • Ptfe Coated Countersunk Screws
  • Hot Dipped Galvanizing Countersunk Screws
  • Phosphate Countersunk Screws
  • Teflon Countersunk Screws
  • Xylon Countersunk Screws
  • Zinc Phosphate Countersunk Screws
  • Manganese Phosphate
  • Zinc Electro Plating (Hexavalent or Trivalent Chrome)
  • ZAC (Zinc Alluminium Flake Coating)
  • Cadmium Countersunk Screws

All surface finishes can be supplied, including Zinc, Galvanised, Sherardized, Electroless Nickel, Dacromet, Geomet & PTFE.

Surface treatment
  • Polish
  • Passivation
  • Anodizing
  • Sand blasting
  • Heat-disposing
  • Hot-dip galvanizing
  • Rust preventive oil
  • Black oxide coating
  • Ruspert coating screws
  • Electroplating (color, blue, white, black zinc, Ni, Cr, tin, copper, silver)
Top Manufacturers SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc.
Stainless Steel Countersunk Screws Packing: IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request
Why choose us?
  • Best Price in India and compare to China
  • Professional technical team
  • High precision threads
  • Strong production line
  • Micro Metals will be your reliable partner
MOQ 5 pieces
Test Certificate:
  • Manufacturer Test Certificate as per EN 10204 / 3.1,
  • Tensile testing to ISO 898-1
  • Nut proof load testing to ISO 898-2
  • Suitability for preloading to EN 14399-2
  • Suitability test for calibrated preload to EN 14399-10
  • Charpy Impact testing in accordance with ISO 148-1
  • Hardness testing to ISO 6508-1
  • Tri-Roll Thread Comparators
  • Calibrated gauges and tools
Free Samples Yes
Delivery time Regular product is about 7-15 days, custom product will according to special requirement
Payment Terms T/T, Paypal, Western Union, L/C or Trade Assurance 30% deposit & balance before shipping
Other available material
  • Stainless Steel Countersunk Screws: SUS201, SUS304, SUS316, SUS410
  • Brass Countersunk Screws: C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200CuZn37), C28000(CuZn40)
  • Bronze Countersunk Screws: C51000, C52100, C54400 etc
  • Aluminum Countersunk Screws: Al6061, Al6063 etc
  • Aluminum Alloy Countersunk Screws: Al6061, Al6063 etc
  • Titanium and Titanium Alloy Countersunk Screws: TAD, TA1-TA8, TB2, TC1-TC10
  • Alloy steel Countersunk Screws: SCM435, C10B21, C10B33
Uses & application Railway, Wind tower, Nuclear power, Automotive industry, Construction, Electronic industry

 

Standard Specification of Screws as per British

BS 450 Cheese Head Machine Screw
BS 450 Fillister Head Machine Screw
BS 450 Countersunk Head Machine Screw
BS 450 Flat Head Machine Screw
BS 450 Pan Head Machine Screw
BS 450 Truss Head Machine Screw
BS 1083 Hex Head Cap Screw
BS 1083 Socket Set Screw
BS 2470 Socket Head Cap Screw
BS 2470 Button Head Socket Cap Screw
BS 2470 Flat Head Socket Cap Screw
BS 2470 Flat Point Socket Set Screw
BS 2470 Cup Point Socket Set Screw
BS 2470 Knurled Cup Point Socket Set Screw
BS 2470 Cone Point Socket Set Screw
 

 

We maintain stock of Raised Countersunk Screws in India, Call Now For Stainless Steel Countersunk Tek Screws sample
Types of Stainless Steel Countersunk Screws

  • Raised Torx Countersunk Screws
  • Pozi Raised Countersunk Screws
  • Fine Pitch Socket Countersunk Screws
  • Stainless Steel Countersunk Machine Screws
  • Phillips Countersunk Screws
  • Imperial Socket Countersunk Screws
  • Raised Slotted Countersunk Screws
  • Raised Phillips Countersunk Screws
  • Metric Socket Countersunk Screws
  • Torx Countersunk Screws
  • Pozi Countersunk Screws
  • Slotted Countersunk Screws

 

We are Manufacturer of wide range Black Japanned Countersunk Screws, 6mm Stainless Steel Countersunk Concrete Screws
Basic Types Of Fasteners Weight Chart

 You can find out the csk screw dimensions by clicking the link given here.

Dimensions chart of Stainless Steel Countersunk Screws

Hexagon Socket Countersunk Head Screws| EN ISO 10642 (DIN 7991) Grade 10.9

Stainless Steel Countersunk Screws Dimensions

Stainless Steel Countersunk Screws Dimensions

whatsapp chat