Ph 15 7 mo stainless steel round bar

ph 15 7 rod, AMS 5520 Steel 15-7MO Bright Bar, SS 15-7MO UNS S15700 Round Bars, SS 15-7MO Cold Finished Bars Suppliers in India.

Stainless Steel 13-8 Mo Flat Bar Exporter, 15-7MO DIN 1.4532 Hex Bars, SS 15-7MO Square Bars Manufacturers.

PH 15-7 Mo is a precipitation hardening alloy, which is referred to as a semi austenitic stainless steel because it is formed in a soft austenitic condition. This precipitation hardened Ph 15 7 Mo Stainless Steel Round Bar is well suited for applications that require superior strength in conjunction with moderate corrosion resistance properties.

The chemistry of AMS 5520 Steel 15-7MO Hex bar is similar to alloy grade 17-7. However, the main difference between the two is the substitution of 2% Molybdenum for 2% Chromium in its alloy. This significant substitution of elements in the DIN 1.4532 Threaded Bars results in higher room temperature as well as elevated temperature strength for this stainless steel. After forming the alloy of UNS S15700 Square bar in a soft austenitic condition, the stainless steel may then be hardened to high strength levels with the use of a low temperature heat treatment.

This processing technique permits a minimal level of distortion in the SS 15-7MO Flat bar in comparison to other processes that involve quenching and temper hardening. To optimize strength requirements, the Ph 15 7 Rod may be furnished in the heat treated hard-rolled Condition C to condition CH900, which proves to especially be useful for applications with a limitation in both ductility and workability.

 

Ph 15 7 mo stainless steel round bar
Ph 15 7 mo stainless steel round bar
ph 15 7 rod
ph 15 7 rod
15-7MO Hex Bars
15-7MO Hex Bars

 

Specification of Stainless Steel 15-7MO Round Bars

  • Dimension : EN, DIN, JIS, ASTM, BS, ASME, AISI
  • Grade : 15-7MO (UNS No. S15700) Round Bars 1.4532
  • Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
  • Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
  • Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
  • Application : Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining
  • Condition : Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.
  • Our 15-7MO Round Bars conforms to NACE MR0175/ISO 15156
Chemical Composition Limits of Ph 15 7 mo stainless steel round bar

Weight% C Mn Si P S Cr Ni Mo Al
15-7Mo 0.09 1 1 0.04 0.03 14-16 6.50-7.75 2-3 0.75-1.5
Equivalent Grades of Stainless Steel 15-7MO Bars

STANDARD WERKSTOFF NR. UNS
SS 15-7MO 1.4532 S15700
Ph 15 7 mo stainless steel round bar

Material Condition
Thickness (in) Tensile Strength (ksi) Yield Strength (ksi) Elongation % Hardness
Alloy 15-7 Mo Solution Treated <0.005 150 (max) 65 (max) 25 100 HB (max)
Alloy 15-7Mo TH1050 (AMS 5520) 0.010-0.020 190 170 4 40 HRC
Alloy 15-7 Mo TH1050 (AMS 5520) 0.020-0.1875 190 170 5 40 HRC
Alloy 15-7 Mo TH1050 (AMS 5520) 0.1875-0.500 190 170 6 40 HRC
Alloy 15-7 Mo RH950 (AMS 5520) 0.010-0.020 225 220 3 45 HRC
Alloy 15-7 Mo RH950 (AMS 5520) 0.020-0.1875 225 220 4 45 HRC
Alloy 15-7 Mo RH950 (AMS 5520) 0.1875-0.500 225 220 5 45 HRC
Alloy 15-7 Mo Condition C 200 175 1 41 HRC
Alloy 15-7 Mo Condition CH900 240 230 1 46 HRC
Ph 15 7 mo stainless steel round bar Physical Properties


Condition
A

Condition
TH 1050

Condition
RH 950

Density, lbs/cu in (g/cu cm)

0.282 (7.804)

0.277 (7.685)

0.277 (7.680)

Modulus of Elasticity, ksi (MPa)

29.0 x 10(3) (200)

29.0 x 10(3) (200)

Thermal Conductivity
BTU/hr/ft²/in/°F (W/m-K)
70°F (21°C)
200°F (93°C)
600°F (316°C)
900°F (482°C)

 




 

104 (15.1)
112 (16.2)
136 (19.7)

 

104 (15.1)
112 (16.2)
133 (19.2)
150 (21.7)

Mean Coefficient of Thermal Expansion
in/in/°F (um/m-K)
70-200°F (21-93°C)
70-600°F (21-316°C)
70-800°F (21-427°C)
70-1000°F (21-538°C)

 

8.5 x 10(-5) (14.4)
8.5 x 10(-5) (15.3)
8.9 x 10(-5) (16.0)
9.4 x 10(-5) (16.9)

 

6.1 x 10(-5) (11.0)
6.1 x 10(-5) (11.0)
6.3 x 10(-5) (11.3)
6.6 x 10(-5) (11.9)

 

5.0 x 10(-5) (9.00)
5.6 x 10(-5) (10.1)
5.9 x 10(-5) (10.6)
6.1 x 10(-5) (11.0)

Ph 15 7 mo stainless steel round bar Applications

The following are some of the major applications of Grade 15-7 Mo stainless steel:

  • Paneling and springs
  • Diaphragms
  • Retaining rings
  • Welded and brazed honeycomb paneling
  • Aircraft components bulkheads
SS 15-7MO Round Bars other Types Of Available Products

  • AMS 5520 Steel 15-7MO Polish Bars Manufacturer
  • AISI Stainless Steel 15-7MO Black Bars Distributors
  • Top Quality High 15-7MO Spring Steel Bars
  • 13-8 PH Bright Bar Exporter
  • AMS 5520 15-7MO Forged Round Bars
  • 15-7MO Stainless Steel Rods
  • SS 15-7MO Round Bars
  • AMS 5520 15-7MO Bars
  • 15-7MO UNS S15700 Round Bars
  • AMS 5520 SS 15-7MO Rods Manufacturer
  • Standard AMS 5520 15-7MO Cold Drawn Bars Stockholder
  • High Speed Steel 15-7MO Hollow Bar Suppliers
  • ASME, ASTM, EN, BS, GB, SS 15-7MO Flat Bars
  • 15-7MO Round Bar Suppliers
  • Cold Rolled JIS 15-7MO Rods
  • 15-7MO Steel Threaded Bars Stockist in India
  • 15-7MO SS Cold Drawn & Polished Square Bars
  • Austenitic ASTM Bright 15-7MO Bar
  • 15-7MO Stainless Steel DIN 1.4532 Round Bars
  • AISI 15-7MO Hexagon Bars Dealers

whatsapp chat