Nitronic Alloy 50 Round Bar

Xm 19 Rod, Nitronic Alloy 50 / XM-19 Flat, Bright and Cold Finished Bars Suppliers in India.

Nitronic 50 Ingots & Billets, UNS S20910 hex/ Square/ /threaded bar Manufacturers.

With a yield strength of almost 2 times more than the 300’s series, Nitronic 50 is an austenitic stainless steel alloy. Its crystalline structure is formed by the addition of three main stabilizing elements i.e. – nitrogen, manganese and nickel. Hence, the Nitronic Alloy 50 Round Bar is classified as an austenitic stainless steel grade. Many manufacturers refer to this nitrogen stabilized alloy as a superalloy or a high performance alloy because it exhibits properties that are far more promising than either grade 316 or grade 317.

Perhaps, the most valued virtue of the Xm 19 Rod is the fact that it combats sulfide stress related corrosion cracking. The environment in sour wells often contains hydrogen sulfide, which in a wet state is detrimental to several regular steel alloys. In a high temperature, high pressure surface, Hydrogen sulfide undergoes some form of hydrolysis to form free hydrogen, which gets deposited on the walls of  bars. Some of the free hydrogen molecules enter the matrix of the alloy forming compounds like methane. The newly formed methane plus high pressure and temperature causes conventional steel to crack.

The highly alloyed chemistry of UNS S20910 Hex bar does not permit the free hydrogen to get attached to its microstructure Unlike regular steel however, the Nitronic 50 Square bar resists becoming susceptible to this attack, which is probably why this alloy is listed in the NACE MR 0175. At elevated and at cryogenic temperature settings, the XM-19 Flat bar demonstrates properties like good mechanical strength, good toughness and ductility, all of which are characteristics of austenitic stainless steel alloys.

Nitronic 50 Round Bar
Nitronic 50 Round Bar
Xm 19 Rod
Xm 19 Rod
Nitronic 50 Ingots & Billets
Nitronic 50 Ingots & Billets

 

Specification of Nitronic Alloy 50 Round Bars

  • Dimension : EN, DIN, JIS, ASTM, BS, ASME, AISI
  • specification: AMS 5764, ASTM A 193, ASTM A 262, ASTM A 276, ASTM A 276 Condition A, ASTM A 276 Condition S, ASTM A 479, EN 1.3964, ISO
  • 15156-3, NACE MR0175, UNS S20910, Werkstoff 1.3964
  • Common Trade Names: N-50 Stainless
  • Grade :Nitronic Alloy 50 / XM-19 (UNS No. S20910) Round Bars
  • Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
  • Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
  • Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
  • Application : Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining
  • Condition : Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.
  • Our Nitronic Alloy 50 / XM-19 Round Bars conforms to NACE MR0175/ISO 15156
Nitronic 50 Round Bar Industry Standards
  • UNS S20910
  • ASTM A276
  • ASTM A479
  • XM-19 / XM-19HS
  • Aquamet 22
Equivalent Grades of Nitronic Alloy 50 / XM-19 Bars

STANDARD WERKSTOFF NR. UNS
Nitronic Alloy 50 / XM-19 1.3964 S20910
Chemical Composition of Nitronic 50 Round Bar

Grade C N Ni Cr Mn S Si
Nitronic Alloy 50 / XM-19 .06 0.20 – 0.40 11.50 – 13.50 20.50 – 23.50 .10 0.03 1.00
Nitronic 50 Round Bar Mechanical Properties

The following table shows mechanical properties of stainless steel grade NITRONIC® 50 (XM-19).

Properties
Metric
Imperial
Tensile strength
690 MPa
100 ksi
Yield strength
380 MPa
55 ksi
Elongation
35%
35%
Hardness
293
293
Nitronic 50 Round Bar Physical Properties

The physical properties of stainless steel grade NITRONIC® 50 (XM-19) are tabulated below.

Properties
Metric
Imperial
Density
7.88 g/cm3
0.285 lb/in3
Nitronic 50 Round Bar Other Designations

Other designations that are equivalent to stainless steel grade NITRONIC® 50 (XM-19) include the following:

  • AMS 5764
  • ASTM A240
  • ASTM A276
  • ASTM A312
  • ASTM A314
  • ASTM A403
  • ASTM A479
  • ASTM F1314
  • NACE MR0175/ISO 15156-3
  • NACE MR0103
Nitronic 50 Round Bar Applications

NITRONIC® 50 (XM-19) is widely used in the following sectors:

  • Textile
  • Marine
  • Nuclear
  • Medical
  • Fertilizer
  • Chemical
  • Petroleum
  • Petrochemical
  • Food processing
  • Pulp and Paper
 
Nitronic Alloy 50 / XM-19 Round Bars other Types Of Available Products

  • Nitronic Alloy 50 / XM-19 Polish Bars
  • AISI Nitronic 50 Black Bars
  • Top Quality High Nitronic Alloy 50 Spring Steel Bars
  • Nitronic Alloy 50 / XM-19 Bright Bar
  • Nitronic Alloy 50 Forged Round Bars
  • Nitronic Alloy 50 Rods
  • Nitronic 50 / XM-19 Round Bars
  • 50 Nitronic Alloy Bars
  • Nitronic Alloy UNS S20910 Round Bars
  • Nitronic Alloy 50 / XM-19 Rods
  • Standard Nitronic 50 Cold Drawn Bars
  • High Speed Steel Nitronic Alloy 50 Hollow Bar
  • ASME, ASTM, EN, BS, GB, Nitronic Alloy 50 Flat Bars
  • Nitronic Alloy 50 / XM-19 Round Bar Suppliers
  • Cold Rolled JIS Nitronic Alloy 50 / XM-19 Rods
  • Nitronic Alloy 50 Threaded Bars
  • Nitronic Alloy 50 Cold Drawn & Polished Square Bars
  • Austenitic ASTM Bright Nitronic 50 Bar
  • Alloy 50 / XM-19 Nitronic Round Bars
  • AISI Nitronic Alloy 50 Hexagon Bars

whatsapp chat