Nickel Round Bar

most dedicated ASTM B160 UNS N02201 Rod, Din 2.4068 Hex Bar Suppliers in Mumbai, India

buy large or small quantity Alloy 201 Flat/Square/ Threaded bar Stock at discounted prices

Nickel 201 is a low carbon, commercially pure wrought alloy grade. Produced under specification ASTM B160, these components may be processed by means of either hot-working, cold-working, or annealing. Along with the chemical composition and mechanical properties, the ASTM B160 UNS N02201 Rod must conform to the values of a tension test, Chemical analysis, and hardness test.

The properties of this alloy are similar to that of nickel 200. However, because the content of carbon is lower in the alloy of Nickel 201 Round Bar, it is not susceptible to embrittlement brought on by inter-granular carbon at elevated temperatures. The higher content of nickel in the alloy makes these components resistant to several chemicals including acids and alkalis, as well as to dry gases at ambient temperature. The significance of nickel in the Nickel Alloy 201 Square bar is also responsible for the material’s resistance to mineral acids. However, this is a property that is dependent on aspects such as the temperature, aeration, and concentration of the solution.

The corrosion resistance properties of a Din 2.4068 Hex Bar is far better when the acid has been de-aerated. Its corrosion resistance properties, ensure sustenance of this alloy in several corrosive compounds. For instance, the Alloy 201 Flat bar may be used in the manufacture and handling of chemicals such as sodium hydroxide, Analine hydrochloride, as well as in the chlorination of aliphatic hydrocarbons including chemicals like methane, benzene, and ethane.

Nickel 201 Round Bar
Nickel 201 Round Bar
ASTM B160 UNS N02201 Rod
ASTM B160 UNS N02201 Rod
Din 2.4068 Hex Bar
Din 2.4068 Hex Bar

Nickel 201 Rod manufacturer in India, The right Place of supply of UNS N02201 Nickel Bar in India at Best Price. We provide FREE sample.

Nickel 201 Round Bar Price


10% 8% 12% 3%
CIF RATES CIF RATES CIF RATES CIF RATES EX FACTORY
GRADE FORM RATE PER KG (USD) RATE PER KG (EURO) RATE PER KG (POUND) RATE PER KG (DIHRAM) RATE PER KG (INR) SIZES
MONEL 500 EXPORT BRIGHT ROUND BARS 78.1 83.4 100.7 268.5 5822 5MM TO 200MM
MONEL 400 80.3 85.6 103.5 276.0 5986
INCONEL 718 63.8 68.0 82.2 219.3 4756
 INCONEL 600 57.2 61.0 73.7 196.5 4264
HC276 59.4 63.4 76.6 204.2 4428
HASTELLOY C22 68.8 73.3 88.6 236.3 5125

 

Please note this is an approx UNS N02201 Nickel Bar Price in India. For final Nickel 201 Rod price list please Make an inquiry.

Nickel 201 Rod Specification

Alloy
Material-No.
DN-Trade Name
ASTM Specification
UNS-No.
DIN Specification
Nickel 201
2.4068
NR-Nickel 99
ASTM B160
N02201
DIN 17740

Nickel 201 Round Bar Condition


ANN
Annealed
H&T
Hardened and tempered.
PH
Precipitation hardened.
Grade Nickel 201
Specification UNS N02201, ASME SB160/ASTM B160
Round bar size Dia: 3mm~800mm
Hollow Bar 32 OD x 16 ID to 250 OD x 200 ID
Square bar size 4mm to 100mm
Hex Bar size 2mm to 100mm A/F
Rectangles Size 33 x 30mm to 295 x 1066mm
Billet Size 1/2″ to 495mm Diameter
Channel Bar 80 x 40 to 150 x 75mm section; 5 to 6mm thickness
Flat bar size Thickness: 2mm to 100mm
Width: 10mm to 500mm
Hollow Bar 32mm Outside Diameter x 16mm Inside Diameter to 250mm Outside Diameter x 200mm Inside Diameter)
Angle bar size 3*20*20~12*100*100
Form Rings, Hollow, Flat Bar, Rectangle, Triangle, Square,Rod, Half Round Bar, T-Bar, Hex (A/F), Precision Ground Bar, Round, Channel Bar, Blocks, Round Rod, Threaded, Profiles, Billet, Ingot, I/H Bar, Forging etc.
Tolerance H8, K12, H10, H11, K10, H9, K11, K9, H12, H13, or custom
Technique Forged Round Bar, Rod, Hot Rolled, Cold Drawn, Cold Rolled,
Condition annealed, Hardened and tempered
Surface Polished, Cold Drawn, Hot Rolled Pickled, Sand Blasting Finished, Bright, Hairline

Alloy 201 Bar Surface finish


RT
Rough turned/peeled
P&T
Peeled and turned
SRE
Slit rolled edge
BD
Bright drawn
P
Polished
CD
Cold drawn
HRAP
Hot rolled annealed and pickled
CF
Cold finished
HF
Hot finished
CG
Centreless ground
PR
Peeled and reeled
ST
Smooth turned
Nickel 201 Round Bar suppliers

UNS N02201 Nickel Hollow Bar
UNS N02201 Nickel Hollow Bar
Alloy 201 Rebar
Alloy 201 Rebar
Nickel 201 Threaded Bar
Nickel 201 Threaded Bar
Alloy 201 Hexagonal Bar
Alloy 201 Hexagonal Bar

Nickel 201 Round Bar
Nickel 201 Round Bar
Nickel Alloy 201 Half-Round Bar
Nickel Alloy 201 Half-Round Bar
Alloy 201 T-Bar
Alloy 201 T-Bar
UNS N02201 Nickel Rounds
UNS N02201 Nickel Rounds

Nickel 201 Square Bar
Nickel 201 Square Bar
Nickel 201 Flat Bar
Nickel 201 Flat Bar
UNS N02201 Nickel Rectangular Bar
UNS N02201 Nickel Rectangular Bar
Nickel 201 Rod
Nickel 201 Rod

Nickel 201 Hex Bar
Nickel 201 Hex Bar
Alloy 201 Triangle Bar
Alloy 201 Triangle Bar
Nickel Alloy 201 Precision Ground Stock
Nickel Alloy 201 Precision Ground Stock
Alloy 201 Precision Ground Bar
Alloy 201 Precision Ground Bar
Nickel 201 Round Bar Sizes


Type
SIZES (Inches)
ISO Tolerance
SIZES (mm)
Peeled and Polished
1.50″ to 6.00″
h11-DIN 1013
40.00 to 150.00
Cold Drawn and Ground
5/6″ to 2.50″
h9-h8-h11-h10
10.00 to 75.00
Cold Drawn and Polish
1/8″ to 3.00″
h9-h8-h11-h10
3.00 to 75.00
Peeled and Ground
3/4″ to 2.00″
h10-h9-h11
20.00 to 50.00

Cut to size on request (tolerance +2/-0 mm).

50.0
6.0
45.0
5.0
60.0
8.0
55.0
7.0
70.0
10.0
65.0
9.0
75.0
12.0
90.0
20.0
80.0
16.0
100.0
25.0
160.0
35.0
130.0
30.0
200.0
40.0
  • SW 19 Nickel 201 Hex Rod
  • SW 17 Nickel 201 Hex Rod
  • SW 13 Nickel 201 Hex Rod
  • SW 27 Nickel 201 Hex Rod
  • SW 24 Nickel 201 Hex Rod
Nickel Alloy 201 Bar Stock

Product form
Dimension
Rod, Round bar, annealed, cold drawn
Weight=0.7 kg/m, Dia=10.0 mm
Rod, Round bar, rough turned, hot finished, annealed
Weight=162 kg/m, Dia=152.4 mm,
Rod, Round bar, annealed, cold drawn
Weight=0.23 kg/m, Dia=6.0 mm
Rod, Round bar, annealed, hot finished, peeled
Weight=17.8 kg/m, Dia=50.0 mm
Rod, Round bar, cold drawn h9
Weight=1.1 kg/m, Dia=12.0 mm,
Rod, Round bar, annealed, hot finished, peeled
Weight=70.8 kg/m, Dia=100.0 mm
Rod, Round bar, peeled, forged
Weight=40.0 kg/m, Dia=75.0 mm,
Rod, Round bar, annealed, forged, machined
Weight=226 kg/m, Dia=180.0 mm

Micro Metals is India’s largest stockist and supplier of Nickel 201 Round Bar with an extensive inventory for commercial and industrial applications.

Nickel 201 Round Bar composition


Grade
Fe
Si
C
S
Ni
Mn
Mg
Cu
Ti
Nickel 201
0.4 max
0.2 max
0.02 max
0.01 max
99.0 min
0.35 max
0.15 max
0.25 max
0.1 max
Nickel 201 Bar mechanical properties


Density
Elongation
Tensile Strength
Melting Point
Yield Strength (0.2%Offset)
8.9 g/cm3
45 %
Psi – 67000 , MPa – 462
1446 °C (2635 °F)
Psi – 21500 , MPa – 148
Nickel 201 ASTM B160 Round Bar & rod Equivalent Grades

STANDARD
UNS
WERKSTOFF NR.
AFNOR
GOST
BS
JIS
EN
Nickel 201
N02201
2.4068
НП-2
NA 12
NW 2201
NLC-Ni 99
since 2014 high quality Nickel 201 Round Bar suppliers in Mumbai, India
Offer a huge selection of high quality ASTM B160 UNS N02201, flat, square, angle or hollow sections at Factory Price, Contact for best Nickel 201 Rod suppliers in India & UK

whatsapp chat