Monel K500 Round Bar and Rod

ASTM B865 UNS N05500 Hex Bar and Flat bar manufacturer in India

Monel K500 Round Bar
Monel K500 Round Bar
Alloy K500 Rod
Alloy K500 Rod
ASTM B865 UNS N05500 Flat Bar

ASTM B865 UNS N05500 Flat Bar
DIN 2.4375 Hex Bar

DIN 2.4375 Hex Bar

Nickel Alloy K500 Square Bar

Nickel Alloy K500 Square Bar
ASME SB 865 Alloy K500 Bright Bar

ASME SB 865 Alloy K500 Bright Bar

 

We help you to save your cost by providing exact size of DIN 2.4375 Square Bar

 

Monel K500 Round Bar is made up of a nickel copper alloy that can be hardened through precipitation methods and has extreme corrosion resistance to acids, alkalis and oxidation. Micro Metal is a leading manufacturer and supplier of the Monel K500 Flat Bar and other types of bars in different dimensions, shapes and types. There are different grades of monel such as 400, 450, 500 and so on. Each of these grades has different chemical composition and a different combination of mechanical properties.

The Monel K500 Hex Bar is strong and is used in the production equipment for oil and gas, propellers, pump shafts and in centrifugal pump parts. The material has minimum yield strength of 690MPa and minimum tensile strength of 965MPa. These very high strength values allow the 2.4375 Alloy K500 Rod and other types to be used in high velocity fluid lines as they do not crack nor do they corrode under harsh conditions. We supply the products in large scales to a wide range of audience and therefore our ASTM B865 UNS N05500 Bar Stock is sufficient to cover any of your orders.

The dimensions of the bars range from 100mm to 3000mm and the diameters of different types range from 0.1mm to 100mm depending on the different standards. The different finishes such as black, bright and others help maintain the corrosion resistance. The use of the UNS N05500 Bright Bar type is seen mostly in the outdoor applications where the bars and rods are visible and create an aesthetic value. Please contact us for the Monel K500 Square bar prices and more information on the different types of products in this grade of monel.

 

ASTM B865 UNS N05500 Bar Surface finish

CD
Cold drawn
P
Polished
BD
Bright drawn
SRE
Slit rolled edge
CG
Centreless ground
HF
Hot finished
CF
Cold finished
HRAP
Hot rolled annealed and pickled
P&T
Peeled and turned
RT
Rough turned/peeled
ST
Smooth turned
PR
Peeled and reeled

 

Alloy K500 Hex Bar Condition

H&T
Hardened and tempered.
ANN
Annealed
PH
Precipitation hardened.

 

Spec Chart Of Monel K500 Round Bar


Specifications ASTM B 865 / ASME SB 865 / AMS 4676 / QQ N 286, ASTM B865 UNS N05500 Monel K500
Grade Monel K500 – UNS N05500, Nickel Alloy K500
Common Trade Names
  • Monel® K500
  • Alloy K500
  • Monel® alloy K-500
Round bar size Diameter: 3-~800mm
Hex Bar size 2-100mm A/F
Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Square bar size 4 to 100mm
Technique K500 Monel Cold Drawn, Hot Rolled, Forged Round Bar, Rod, Cold Rolled
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Section 3.0 to 12.0mm thickness
Form Precision Ground Bar, Flat Bar, Square, Round, Half Round Bar, Rod, Rectangle, Hex (A/F), T-Bar, Channel Bar,Blocks, Round Rod, Threaded, Profiles, Billet, Ingot, I/H Bar, Forging, Rings, Hollow, Triangle etc.
Rectangles Size 33 x 30mm to 295 x 1066mm
Surface Cold Drawn, Bright, Sand Blasting Finished, Hot Rolled Pickled, Hairline, Polished
Processing Bar cutting to 650mm
Billet Size 1/2″ to 495mm Diameter
Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
Condition Hardened & tempered, annealed
Our K500 Monel Round bar conforms to NACE MR0175/ISO 15156

 

Check weight, size chart and Price list of ASME SB 865 Alloy K500 Forged Bar Ex Mumbai

 

2.4375 Alloy K500 Rod price

Monel K500 Round Bar Price in India
Quantity
Price
60.0 dia x 250mm long
1
$723.58
60.0 dia x 100mm long
1
$425.72
60.0 dia x 500mm long
1
$1,220.95
60.0 dia x 1000mm long
1
$2,215.69

 

Check online inventory of ASTM B865 UNS N05500 Bar

5-500mm Bright Black Surface Hot Cold Rolled Monel K500 Bar
5-500mm Bright Black Surface Hot Cold Rolled Monel K500 Bar
0.5 Nickel Round Bar K500
0.5″ Nickel Round Bar K500
Monel K500 Welding Rod 12mm
Monel K500 Welding Rod 12mm
0.625 Nickel Round Bar K500
0.625″ Nickel Round Bar K500

 

Other types of Monel K500 round bar available

We can supply Monel K500 round bar in following forms & shapes:

  • Channel Bars
  • Flat Bars
  • Blocks
  • Round
  • Rings
  • Square
  • T-Bars
  • Precision Ground Bars
  • Hollow
  • Round Rod
  • Rod
  • Forging
  • Hex (A/F)
  • Billet
  • Rectangle
  • I/H Bars
  • Triangle
  • Half Round Bars
  • Threaded
  • Profiles
  • Ingot
  • Rectangular Bar
Nickel Alloy K500 Bar  Tolerances

Tolerances for Cold Drawn Monel K500 Round Bar
Shape / Section Size, diameter or width across flats Permitted variation
mm mm
Round ≥6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
+ 0 to – 0.070
+ 0 to – 0.085
+ 0 to – 0.100
+ 0 to – 0.120
+ 0 to – 0.140
Flat (thickness) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
+ 0 to – 0.110
+ 0 to – 0.130
+ 0 to – 0.250
+ 0 to – 0.350
Flat (width) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
> 100 ≦ 130
> 130 ≦ 160
> 160 ≦ 320
+ 0 to – 0.110
+ 0 to – 0.130
+ 0 to – 0.160
+ 0 to – 0.190
+ 0 to – 0.220
+ 0 to – 0.350
+ 0 to – 1.00
+ 1.00 to – 1.00
Square and
hexagon
≥ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 105
+ 0 to – 0.090
+ 0 to – 0.110
+ 0 to – 0.130
+ 0 to – 0.160
+ 0 to – 0.250

Tolerances of Turned ASTM B865 Monel K500 Round Bar (BS 970-3)

Turned Monel K500 round bar Tolerances
Monel K500 round bar Size, diameter Permitted variation
mm mm
≧ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 120
> 120 ≦ 180
> 180 ≦ 250
> 250 ≦ 315
> 315 ≦ K500
> K500
+ 0 to – 0.070
+ 0 to – 0.085
+ 0 to – 0.100
+ 0 to – 0.120
+ 0 to – 0.140
+ 0 to – 0.160
+ 0 to – 0.185
+ 0 to – 0.210
+ 0 to – 0.230
+ 0 to – 0.250

Tolerances of Precision Inconel WERKSTOFF NR. 2.4375 Round Bar (BS 970-3)

Precision Nickel Alloy 625 Round Bar Tolerances
Section Size,
diameter
Permitted overall variation
Class A Class B Class C
mm mm mm mm
Round ≧ 6 <75 0.05 0.025 0.013

Tolerance of Inconel UNS N05500 Bright Round Bar (BS EN ISO 286-2 )

Inconel 625 round bar Tolerance ISO “H” Series in MM
NOMINAL SIZE h5 h6 h7 h8 h9 H10 H11 h12
DIAMETER mm
~ to 3 +0.004/0 +0.006/0 +0.01/0 +0.014/0 +0.025/0 +0.04/0 +0.06/0 +0.1/0
over 3 to 6 +0.005/0 +0.008/0 +0.012/0 +0.018/0 +0.03/0 +0.048/0 +0.075/0 +0.12/0
over 6 to 10 +0.006/0 +0.009/0 +0.015/0 +0.022/0 +0.036/0 +0.058/0 +0.09/0 +0.15/0
over 10 to 18 +0.008/0 +0.011/0 +0.018/0 +0.027/0 +0.043/0 +0.07/0 +0.11/0 +0.18/0
over 18 to 30 +0.009/0 +0.013/0 +0.021/0 +0.033/0 +0.052/0 +0.084/0 +0.13/0 +0.21/0
over 30 to 50 +0.011/0 +0.016/0 +0.025/0 +0.039/0 +0.062/0 +0.1/0 +0.16/0 +0.25/0
over 50 to 80 +0.013/0 +0.019/0 +0.03/0 +0.046/0 +0.074/0 +0.12/0 +0.19/0 +0.3/0
over 80 to 120 +0.015/0 +0.022/0 +0.035/0 +0.054/0 +0.087/0 +0.14/0 +0.22/0 +0.35/0
over 120 to 180 +0.018/0 +0.025/0 +0.04/0 +0.063/0 +0.1/0 +0.16/0 +0.25/0 +0.4/0
over 180 to 250 +0.02/0 +0.029/0 +0.046/0 +0.072/0 +0.115/0 +0.185/0 +0.29/0 +0.46/0
Our Stock list of Nickel Alloy K500 bar

Alloy Product form Dimension
ALLOY K-500 (66 Ni/32 Cu/2 Al) Rod; cold drawn Dia=5.0 mm, Weight=0.17 kg/m
ALLOY K-500 (66 Ni/32 Cu/2 Al) Rod; hot rolled, annealed, centerless ground Dia=12.0 mm, Weight=0.96 kg/m
ALLOY K-500 (66 Ni/32 Cu/2 Al) Rod; hot rolled, annealed, peeled Dia=16.0 mm, Weight=1.6 kg/m
ALLOY K-500 (66 Ni/32 Cu/2 Al) Rod; peeled, solution annealed Dia=19.05 mm, Weight=2.41 kg/m
ALLOY K-500 (66 Ni/32 Cu/2 Al) Rod; hot rolled, annealed, peeled Dia=25.0 mm, Weight=3.5 kg/m
ALLOY K-500 (66 Ni/32 Cu/2 Al) Rod; hot rolled, solution annealed Dia=30.0 mm, Weight=6.05 kg/m
ALLOY K-500 (66 Ni/32 Cu/2 Al) Rod; hot rolled, annealed, peeled Dia=45.0 mm, Weight=13.7 kg/m
ALLOY K-500 (66 Ni/32 Cu/2 Al) Rod; hot rolled, annealed, peeled Dia=55.0 mm, Weight=20.1 kg/m
ALLOY K-500 (66 Ni/32 Cu/2 Al) Rod; hot formed, solution annealed Dia=60.0 mm, Weight=24.2 kg/m
ALLOY K-500 (66 Ni/32 Cu/2 Al) Rod; hot formed, solution annealed Dia=100.0 mm, Weight=66.3 kg/m

 

Our Nickel Alloy K500 Bar Special Features

  • Packaging list (laminated) placed with box/crate.
  • Bundles strapped with plastic strips.
  • End of Monel K500 ASTM B865 Round Bar protected by plastic caps.
  • Each radius of U-Bend tube separated by a separator.
  • Each bundle covered with plastic for protection against extreme weather.

 

Mechanical Analysis Of UNS N05500 Bright Bar


Density 8.44 g/cm3
Melting Point 1350 °C (2460 °F)
Tensile Strength Psi – 160000 , MPa – 1100
Yield Strength (0.2%Offset) Psi – 115000 , MPa – 790
Elongation 20 %

 

Chemical Composition Standard Of Monel K500 Square bar



Monel K500
Ni 63.0 min
Fe 0.5 – 2
C 0.25 max
Mn 1.5 max
Si 0.5 max
Cu 27.0 – 33.0
Al 2.3 – 3.15
Ti 0.35 – 0.85
S 0.010 max

 

International Specification Comparison chart DIN 2.4375 Forged Bar

Standard
Monel K500
UNS
N05500
Werkstoff Nr.
2.4375

 

UNS N05500 Round Bar Size Chart

The sizes of Monel UNS N05500 Bars can also be selected when using the THD model.

Size & Dimensions of Monel K500 round bar
Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.K500 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.K500 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

 

Buy your sizes from our Monel K-500 Bright Bars, pump shaft, cold / hot rolled bar

 

Industrial Application of Monel K-500 Bright Bars

  • Seawater cooling equipment.
  • Pulp and paper processing.
  • Processing plant for sulphuric, phosphoric and acetic acids.
  • Wires in electrostatic precipitators.
  • Oil refinery components.
  • Components in gas scrubbing plants.

 

K500 Monel Round Bar Weights


Round Bar
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3mm 0.017 0.055 20mm 0.753 2.470 3″ 10.900 35.762
1/8″ 0.019 0.062 22mm 0.908 2.979 3-1/4″ 12.800 41.996
5/32″ 0.029 0.095 7/8″ 0.926 3.038 3-1/2″ 14.850 48.772
4mm 0.030 0.098 24mm 1.080 3.543 3-3/4″ 17.001 55.780
3/16″ 0.043 0.141 25mm 1.180 3.871 4″ 19.306 63.340
5mm 0.047 0.154 1″ 1.210 3.970 4-1/4″ 21.908 72.249
7/32″ 0.058 0.190 26mm 1.271 4.170 4-1/2″ 24.4487 80.340
6mm 0.068 0.223 27mm 1.368 4.490 4-3/4″ 27.366 90.249
1/4″ 0.076 0.249 1-1/8″ 1.534 5.033 5″ 30.461 99.940
7mm 0.091 0.298 30mm 1.691 5.548 5-1/2″ 36.690 121.000
5/16″ 0.118 0.387 1-1/4″ 1.924 6.349 6″ 43.860 143.900
8mm 0.120 0.398 32mm 1.894 6.314 6-1/2″ 51.093 167.630
9mm 0.152 0.498 1-3/8″ 2.303 7.550 7″ 59.432 196.000
3/8″ 0.170 0.557 35mm 2.390 7.553 7-1/2″ 68.226 225.000
10mm 0.189 0.620 36mm 2.438 7.999 8″ 77.586 254.55
11mm 0.228 0.748 38mm 2.792 8.903 10″ 121.048 397.140
7/16″ 0.232 0.761 1-1/2″ 2.715 8.951      
12mm 0.271 0.889 40mm 3.009 9.872      
1/2″
0.303 0.994
1-5/8″
3.200 10.449      
13mm
0.318 1.043
1-3/4″
3.712 12.179      
14mm
0.368 1.207
45mm
3.807 12.555      
9/16″
0.383 1.256
1-7/8″
4.260 13.977      
15mm
0.424 1.391
48mm
4.330 14.205      
5/8″
0.473 1.551
50mm
4.698 15.414      
16mm
0.481 1.578
2″
4.848 15.906      
17mm
0.543 1.791
2-1/8″
5.475 17.963      
11/16″
0.573 1.880
2-1/4″
6.135 20.128      
18mm
0.610 2.001
60mm
6.768 22.205      
3/4″
0.682 2.237
2-3/8″
6.838 22.435      
     
2-1/2″
7.576 24.856      
     
2-5/8″
8.354 27.409      
     
2-3/4″
9.169 30.083

 

Type SIZES (mm) SIZES (Inches) ISO Tolerance
Monel UNS N05500 Cold Drawn and Polish Round Bar 3.00 – 75.00 1/8″ – 3.00″ h8-h9-h10-h11
Alloy K500 Cold Drawn and Ground Bar 10.00 – 75.00 5/6″ – 2.50″ h8-h9-h10-h11
K500 Monel Peeled and Polished Round Bar 40.00 – 150.00 1.50″ – 6.00″ h11, h11-DIN 1013
Monel Alloy K500 Peeled and Ground Bar 20.00 – 50.00 3/4″ – 2.00″ h9-h10-h11
DIN 2.4375 Rectangular Bar in cut to sizes, Supplier of Nickel Alloy K500 Round Bar conforms to NACE MR0175/ISO 15156

 

whatsapp chat