Free Cutting Brass Rod

Brass grade C36000 is commonly referred to as Free Cutting Brass Rod or as Free Machining Brass. Since the H C3602 Free Cutting Brass Rods have a machinability rating of 100 this alloy is often considered to be a standard against which all other metals are to be measured.

Manufacturer of Ams 4610 rod, Astm B16 C36000 H02 Brass rod, astm b16 brass rod at lowest price in Mumbai.

Free Cutting Brass Rod
Free Cutting Brass Rod
Ams 4610 Rod
Ams 4610 Rod
 Astm B16 C36000 H02 Brass rod
Astm B16 C36000 H02 Brass rod

 Ams 4610 rod has superior machinability, along with characteristics such as thread rolling and knurling. In a half hard condition, H C3604 Free Cutting Brass Rods could be used as a substitute for leaded steel as a major alloyant for common screw machine products. Furthermore, the BS 2874 Cutting Brass Rods are easily soldered or brazed and this alloy exhibits good resistance to corrosion. Due to the smooth finish of JIS 3250 Free Cutting Brass Rods, these products readily are plated easily.

Typical applications of the astm b16 brass rod include plumbing, hydraulic base, adapters and valve adapters. According to the requirements of the ASTM B16, the alloy grade Astm B16 C36000 H02 Brass rod is to conform to parameters such as chemistry, tensile strength, Rockwell hardness, temper, as well as shape requirements. C36000, which has an astm b16 chemical composition is well suited to be used for high-speed screw machining applications in addition to moderate thread rolling. On the other hand, ASTM B455 is a specification that establishes the requirements for extruded leaded-brass in different architectural shapes of solid cross section, for instance, ASTM B455 Free Cutting Brass Rods which have been produced in Copper Alloy.

 

size standard and specification of Free Cutting Brass Rod

  • Specification:ASTM B 455, B16, UNS C36000
  • Standard & Material: B 16 C 38500, C 36000, BS 2874 CZ – 121Pb3 or CZ124, IS319 Grade I/ II/ III, JIS3250 H C3604 or C3602

 

View ASTM b16 chemical composition, we produce B16 Free Cutting Brass Rods, Free Cutting Brass Rods as per the specifications or standards

Chemical Material Composition of Free Cutting Brass Rod

Chemical Requirements Content (%)
Cu 61.5
Pb 3
Zn 35.5

 

Looking for oldest manufacturer of UNS C36000 Free Cutting Brass Rods, C 38500 Free Cutting Brass Rods Casting, BS 2874 Free Cutting Brass Rods

Mechanical & Physical Properties of Free Cutting Brass Rod

Condition Metric Imperial
Density 8.49 g/cm3 0.307 lb/in³
Melting point 885°C 1630°F
Tensile strength 338-469 MPa 49000-68000 psi
Yield strength (depending on temper) 124-310 MPa 18000-45000 psi
Elongation at break ( in 457.2 mm) 53% 53%
Elastic modulus 117 GPa 17000 ksi
Poisson’s ratio 0.34 0.34
Machinability (UNS C36000 (free-cutting brass) = 100) 100 100
Shear modulus 37 GPa 5370 ksi

 

Most Trusted ASTM B455 Free Cutting Brass Rods, IS 319 Free Cutting Brass Rods, H C3604 Free Cutting Brass Rods Suppliers

 

buy various types of Free Cutting Brass Rod stock available with us

  • C 38500 Free Cutting Brass Rods
  • BS 2874 Free Cutting Brass Rods
  • Free Cutting Brass Rods
  • B16 Free Cutting Brass Rods
  • ASTM B455 Free Cutting Brass Rods
  • H C3602 Free Cutting Brass Rods
  • UNS C36000 Free Cutting Brass Rods
  • IS 319 Free Cutting Brass Rods
  • JIS 3250 Free Cutting Brass Rods
  • H C3604 Free Cutting Brass Rods

 

one of the largest JIS 3250 Free Cutting Brass Rods, BS 2874 Cutting Brass Rods, H C3602 Free Cutting Brass Rods exporter

whatsapp chat