SAE 1541 Round Bar

Grade SAE 1541 Round Bar is a medium carbon steel alloy. 1541 Hot Rolled Round Steel Bar also contains some content of manganese, in addition to residual elements like copper, nickel, molybdenum, and aluminium. Furthermore, both sulfur and phosphorous are also present in the 1541 Cold Rolled Steel Rod as impurities in the alloy.

view SAE 1541 Round Bar price, leading AISI 1541 Hot Rolled Round Steel Bar, Cold Rolled Steel Rod, Hot Rolled Steel Bar manufacturer

SAE 1541 Round Bar
SAE 1541 Round Bar
AISI 1541 Hot Rolled Round Steel Bar
AISI 1541 Hot Rolled Round Steel Bar
SAE 1541 Cold Rolled Steel Rod
SAE 1541 Cold Rolled Steel Rod

 

Check SAE 1541 equivalent grade, buy SAE 1541 material and carbon steel round bar at factory price

The SAE 1541 alloy steel Round Bars is a common alloy used for various applications because it is both versatile and affordable. The affordability of the aisi 1541 carbon steel round bar has been attributed to the lower alloying costs. Since the major alloying elements are only carbon and iron, the cost of a sae 1541 carbon steel round bar is much lower in comparison to an alloy such as stainless steel or nickel based alloys. As per specification, ASTM A29 can be supplied in or produced in the form of carbon 1541 Hot Rolled Steel Bar, cold-finished carbon steel bars, hot-rolled alloy steel bars, as well as cold-finished alloy steel bars.

A heat and product analysis are performed on the ASTM A29 1541 Round bar along with grain size test and some mechanical test. As specified in the ASTM A29 the Carbon Steel Grade 1541 round bar must conform to the grain size requirement. The sae 1541 mechanical properties, as well as the sae 1541 chemical composition, are required to conform to the  ASTM A29 specification.

 

1541 round bars Material Equivalent grades

EN15, EN15A, 37C15, 150M36, 36Mn7, SMn438

 

1541 Round Steel Bars Size Range

16mm, 18mm, 20mm, 22mm, 23.5mm, 24mm, 25mm, 26mm, 27mm, 28mm, 30mm, 32mm, 34mm, 35mm, 36mm, 37mm, 38mm, 40mm, 42mm, 45mm, 46.5mm, 47mm, 50mm, 51mm,53mm, 56mm, 60mm, 63mm, 65mm, 70mm, 75mm, 78mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm, 110mm, 115mm, 120mm, 125mm, 130mm.

See SAE 1541 chemical composition and mechanical properties, Suppliers of AISI 1541 carbon steel round bar

 

Chemical Composition of 1541 Cold Rolled Steel Rod

Component
Weight %
C
Max 0.44
Fe
97.82 – 98.29
Mn
1.35-1.65
P
Max 0.040
S
Max 0.050

 

Mechanical Properties of 1541 Cold Rolled Steel Rod

Mechanical Properties
Metric
English
Comments
Hardness, Brinell
>= 207
>= 207
 
Tensile Strength, Ultimate
>= 706.7 MPa
>= 102500 psi
 
Tensile Strength, Yield
>= 600 MPa
>= 87000 psi
 
Elongation at Break
>= 10 %
>= 10 %
in 2 in. (50 mm)
Reduction of Area
>= 30 %
>= 30 %
 
Modulus of Elasticity
200 GPa
29000 ksi
Typical Carbon Steel
Poissons Ratio
0.29
0.29
Typical Carbon Steel
Machinability
45.00%
45.00%
Cold Drawn AISI 1212 = 100%
Shear Modulus
78.0 GPa
11300 ksi
Typical Carbon Steel

 

Get 1541 Steel Round Bars, Carbon Steel Grade 1541 round bar, ASTM A29 1541 Round bar Stock
Thermal Properties of 1541 Cold Rolled Steel Rod

Thermal Properties
Metric
English
Comments
CTE, linear
12.0 µm/m-°C
6.67 µin/in-°F
Typical Carbon Steel
Specific Heat Capacity
0.470 J/g-°C
0.112 BTU/lb-°F
Typical Carbon Steel
Thermal Conductivity
52.0 W/m-K
361 BTU-in/hr-ft²-°F
Typical Carbon Steel

 

Physical Properties of 1541 Cold Rolled Steel Rod

Physical Properties
Metric
English
Comments
Cold Head
Hot Forge
Wire Form
Density
7.85 g/cc
0.284 lb/in³
 
 
 
 

 

Electrical Properties of 1541 Cold Rolled Steel Rod

Electrical Properties
Metric
English
Comments
Cold Head
Hot Forge
Wire Form
Electrical Resistivity
0.0000170 ohm-cm
0.0000170 ohm-cm
 

 

Held wide stock of 1541 Bearing steel rod, SAE 1541 Bright Bars, SAE 1541 alloy steel Round Bars

 

in addition to 1541 Round Bars following Grades We Manufacture :

MS, SAE 1018, IS 2062, A105, SAE 1008, SAE 1010, SAE 1541, C15, C18, C20, 1020, C22, 1022, C25, 1025, C30, 1030, C35, 1035, 35C8, S35C, C40, 1040, C45, 45C8, 1045, CK45, C50, 1050, C55, 55C8, 1055, C60, 1060, C70, 41Cr4, 40Cr4, 40Cr1, En18, En18D, SAE 1541, SAE 1536, 37Mn2, 37C15, En15, SAE 1141, LF2, EN19, SAE 4140, 42CrMo4, EN24, EN31, SAE 52100, 20MnCr5, 8620, EN1A, EN8, EN8D, EN9, ST 52.3, EN42, En353, SS 410, SS 202, SS 304, SS 316 and other grades as per customer requirement.

 

whatsapp chat