1035 Round Bar

buy SAE 1035 Carbon Steel Round Bar directly from the manufacturer in India

The ASTM specified 1035 Round Bar is a low carbon alloyed steel grade. This SAE 1035 Carbon Steel Round Bar is to conform to the chemistry specifications of the ASTM 1035 by the performance of a heat analysis.

1035 Round Bar
1035 Round Bar
SAE 1035 Carbon Steel Round Bar
SAE 1035 Carbon Steel Round Bar
1035 Steel Rod
1035 Steel Rod

 

keep bulk stock of 1035 Cold Drawn Steel Bar, 1035 Carbon Steel Rods at our stockyard

 The astm 1035 carbon steel flat bar is to be rolled from properly identified heats of mould cast or from strand cast steel. The identification of the Carbon Steel Grade 1035 bar is to be done with any one of the following processes i.e. a basic oxygen process, electric furnace process, or an open hearth process. Per this specification, steel specimens such as C35 Round bar are required to undergo certain tests. For instance, a deformation test, tensile test, as well as a bend test will be conducted on the ASTM specified c1035 carbon steel round bar.

Furthermore, these steel specimens, in this case, astm 1035 carbon steel round bar have to conform to required values of yield strength, tensile strength, stress, in addition to the elongation values. Lastly, the final product i.e. AISI 1035 steel round bars have to be marked by a tag. Since the 1035 Cold Drawn Steel Bar is a water resisting carbon steel grade, the alloy has the ability to exhibit properties like good wear resistance and hardenability. These properties have been attributed to the increase of small quantity of chromium.

 

in addition to 1035 Steel Round Bars following Grades We Manufacture

MS, SAE 1018, IS 2062, A105, 1008, SAE 1010, SAE 1015, C15, C18, C20, 1020, C22, 1022, C25, 1025, C30, 1030, C35, 1035, 35C8, S35C, C40, 1040, C45, 45C8, 1045, CK45, C50, 1050, C55, 55C8, 1055, C60, 1060, C70, 41Cr4, 40Cr4, 40Cr1, En18, En18D, SAE 1541, SAE 1536, 37Mn2, 37C15, En15, SAE 1141, LF2, EN19, SAE 4140, 42CrMo4, EN24, EN31, SAE 52100, 20MnCr5, 8620, EN1A, EN8, EN8D, EN9, ST 52.3, EN42, En353, SS 410, SS 202, SS 304, SS 316 and other grades as per customer requirement.

 

1035 Round Steel Bars Size Range


16mm, 18mm, 20mm, 22mm, 23.5mm, 24mm, 25mm, 26mm, 27mm, 28mm, 30mm, 32mm, 34mm, 35mm, 36mm, 37mm, 38mm, 40mm, 42mm, 45mm, 46.5mm, 47mm, 50mm, 51mm,53mm, 56mm, 60mm, 63mm, 65mm, 70mm, 75mm, 78mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm, 110mm, 115mm, 120mm, 125mm, 130mm.

 

1035 round bars Equivalent grades

EN Name C35 (1.0501)
EN Number 1.0501
DIN C35, CM35
BS 970 070M36
UNI C35
JIS S35C

one of the biggest c1035 carbon steel round bar, Aisi 1035 Hot Rolled Steel Bar, 1035 steel suppliers

 

Mechanical Properties of 1035 Round Bar

The following table shows mechanical properties of 1035 carbon steel round bar.

Properties
Metric
Imperial
Tensile strength, ultimate
585 MPa
84800 psi
Tensile strength, yield
370 MPa
53700 psi
Modulus of elasticity
190-210 GPa
29700-30458 ksi
Bulk modulus (typical for steel)
140 GPa
20300 ksi
Shear modulus (typical for steel)
80 GPa
11600 ksi
Poissons ratio
0.27-0.30
0.27-0.30
Elongation at break (in 50 mm)
30%
30%
Reduction of area
53%
53%
Hardness, Brinell
183
183
Hardness, Knoop (converted from Brinell hardness)
204
204
Hardness, Rockwell B (converted from Brinell hardness)
89
89
Hardness, Vickers (converted from Brinell hardness)
192
192
Machinability (based on AISI 1212 steel. as 100 machinability)
65
65
Physical Properties of 1035 Round Bar

The physical properties of 1035 carbon steel round bar are tabulated below.

Properties
Metric
Imperial
Density
7.85 g/cm3
0.284 lb/in3

 

india’s largest 1035 carbon steel bar, ASTM 1035 carbon steel flat bar exporter

 

Thermal Properties of 1035 Round Bar

The thermal properties of 1035 carbon steel round bar are given in the following table.

Thermal Properties
Metric
Imperial
Thermal expansion co-efficient (@20°C/68°F)
11 µm/m°C
6.11 µin/in°F
Thermal conductivity
51.9 W/mK
360 BTU in/hr.ft2.°F

 

high quality 1035 steel bar, Carbon Steel Grade 1035 bar suppliers
Chemical Composition of 1035 Round Bar

Element
Content
Carbon, C
0.310 – 0.380 %
Iron, Fe
98.63 – 99.09 %
Manganese, Mn
0.60 – 0.90 %
Phosphorous, P
0.040 %
Sulfur, S
0.050 %
 

whatsapp chat