Stainless Steel 310

  • Home
  • /
  • Stainless Steel 310

Stainless Steel 310

Stainless steel 310/310S is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000° F. Its high chromium and nickel contents provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys like Type 304. Stainless 310 is often used at cryogenic temperatures, with excellent toughness to -450°F, and low magnetic permeability.

**As you can see below, Grade 310S is a low carbon version of grade 310. 310S is less prone to embrittlement and sensitization in service.

ss-310

In what form is 310/310S Stainless Steel Available at Micrometals

  • Sheet
  • Plate
  • Bar
  • Pipe & Tube
  • Pipe & Tube (welded & seamless)
  • Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
  • Weld Wire

Mechanical Properties

Representative Tensile Properties

Temperature, °F Ultimate Tensile Strength, ksi .2% Yield Strength, ksi Elongation Percent
70 80.0 35.0 52
1000 67.8 20.8 47
1200 54.1 20.7 43
1400 35.1 19.3 46
1600 19.1 12.2 48

Typical Creep-Rupture Properties

Temperature, °F Minimum
Creep 0.0001%/hr, ksi
100,000
Hour Rupture Strength, ksi
12000 14.9 14.4
1400 3.3 4.5
1600 1.1 1.5
1800 .28 .66